Jump to content

Hi to all our members ... We  would just like to draw your attention to the latest post on the following link... Thank you for your attention .If you have already responded to my note  on Chatbox  about this please ignore this sticky note ... Thanks  folks ....

http://www.tipf.co.uk/forums/topic/46369-important~-the-forum-its-future-and-finances/

Clicker and Ryewolf   ADMIN TEAM 

Regretfully we have to once again ask members for  some financial support in order to  keep TIPF  running till December 2023. The more pledges we have to become  FRIEND OF THE FORUM  the less the individual cost will be so  if you want this Forum to continue  please follow the link below  and decide  if you are able to  support us . Thank you all for your support in the past ... it has been appreciated  a great deal ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-important-notice/

 Clicker and Ryewolf  ...  Admin Team 

Hi TIPFers 

I AM HERE AGAIN WITH THE  BEGGING BOWL TO ENSURE THE FORUM CAN KEEP GOING ... Please follow  below if you want to  support the continuation  of this Forum and  this  small but friendly community. 

As always your support is  both vital and appreciated ...

 Clicker and Ryewolf ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-4th-july-2023/

 

I need a shave

fuzzyedges

By fuzzyedges
in Close Up and Macro

Recommended Posts

fuzzyedges

fuzzyedges

Posted
  • Author
Posted

Any chance of some details... camera, lens etc.

 

Sure

First a cooperative dragon

Camera canon 50d    lens 100-2.8 macro Kenko extension tubes, all of them = 68mm

Settings 160     f8      400iso

flash Hanmex tz1 (off camera on bracket mounted horizontal see post with picture) set in telephoto mode on blue setting inclined 60 degrees, fitted with soft diffuser see post http://www.tipf.co.uk/index.php/topic/3951-things-with-wings/?view=findpost&p=30557

Now back to a hanmex

Link to comment

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...