Jump to content

Hi to all our members ... We  would just like to draw your attention to the latest post on the following link... Thank you for your attention .If you have already responded to my note  on Chatbox  about this please ignore this sticky note ... Thanks  folks ....

http://www.tipf.co.uk/forums/topic/46369-important~-the-forum-its-future-and-finances/

Clicker and Ryewolf   ADMIN TEAM 

Regretfully we have to once again ask members for  some financial support in order to  keep TIPF  running till December 2023. The more pledges we have to become  FRIEND OF THE FORUM  the less the individual cost will be so  if you want this Forum to continue  please follow the link below  and decide  if you are able to  support us . Thank you all for your support in the past ... it has been appreciated  a great deal ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-important-notice/

 Clicker and Ryewolf  ...  Admin Team 

Hi TIPFers 

I AM HERE AGAIN WITH THE  BEGGING BOWL TO ENSURE THE FORUM CAN KEEP GOING ... Please follow  below if you want to  support the continuation  of this Forum and  this  small but friendly community. 

As always your support is  both vital and appreciated ...

 Clicker and Ryewolf ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-4th-july-2023/

 

Small steam attraction


Paul

Recommended Posts

It is indeed Korky. Me & the family had a little ride on board too, but I took the opportunity to snatch a shot from trackside later.

 

We also went in the museum and workshop, and in the latter, was an intriguing option for folks with cameras...

 

post-784-0-77640300-1395598727.jpg

 

 

Paul.

Link to comment

I assume the loco is 'pulling' not 'pushing', otherwise the driver would not have a good view ahead!

It pulled out of the station, travelled about a mile and a half, then pushed back! There was another engine though on t'other end!

Paul.

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...