Jump to content

Hi to all our members ... We  would just like to draw your attention to the latest post on the following link... Thank you for your attention .If you have already responded to my note  on Chatbox  about this please ignore this sticky note ... Thanks  folks ....

http://www.tipf.co.uk/forums/topic/46369-important~-the-forum-its-future-and-finances/

Clicker and Ryewolf   ADMIN TEAM 

Regretfully we have to once again ask members for  some financial support in order to  keep TIPF  running till December 2023. The more pledges we have to become  FRIEND OF THE FORUM  the less the individual cost will be so  if you want this Forum to continue  please follow the link below  and decide  if you are able to  support us . Thank you all for your support in the past ... it has been appreciated  a great deal ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-important-notice/

 Clicker and Ryewolf  ...  Admin Team 

Hi TIPFers 

I AM HERE AGAIN WITH THE  BEGGING BOWL TO ENSURE THE FORUM CAN KEEP GOING ... Please follow  below if you want to  support the continuation  of this Forum and  this  small but friendly community. 

As always your support is  both vital and appreciated ...

 Clicker and Ryewolf ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-4th-july-2023/

 

Recommended Posts

I was gifted a Skink Pinhole kit for my Fuji this week and got a chance to try it this morning. Its the equivalent of a 24mm f110 (yes one hundred and ten) lens though you can narrow the FoV with extension tubes. Unfortunately using a pinhole on a small(ish) sensor isn't ideal as you are dealing with catastrophic levels of diffraction that really requires large format film.

However that isn't going to stop me experimenting and while I would like sharper results its not really about sharpness with such a basic imaging tool so I'll just have to be creative.

6am_Friday-4.jpg

6am_Friday-1-2.jpg

6am_Friday-2-2.jpg

6am_Friday-3-2.jpg

 

 

Link to comment

Looking at those images I'd say that the hole is quite non-circular, since I'm not familiar that particular kit I don't know if that is intentional.

BTW for large format the reduction in spot angular size is typically partly negated by more extreme f-ratios (for my pinhole for the Intrepid the range is typically 200-400).

Link to comment
  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...