Jump to content

Hi to all our members ... We  would just like to draw your attention to the latest post on the following link... Thank you for your attention .If you have already responded to my note  on Chatbox  about this please ignore this sticky note ... Thanks  folks ....

http://www.tipf.co.uk/forums/topic/46369-important~-the-forum-its-future-and-finances/

Clicker and Ryewolf   ADMIN TEAM 

Regretfully we have to once again ask members for  some financial support in order to  keep TIPF  running till December 2023. The more pledges we have to become  FRIEND OF THE FORUM  the less the individual cost will be so  if you want this Forum to continue  please follow the link below  and decide  if you are able to  support us . Thank you all for your support in the past ... it has been appreciated  a great deal ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-important-notice/

 Clicker and Ryewolf  ...  Admin Team 

Hi TIPFers 

I AM HERE AGAIN WITH THE  BEGGING BOWL TO ENSURE THE FORUM CAN KEEP GOING ... Please follow  below if you want to  support the continuation  of this Forum and  this  small but friendly community. 

As always your support is  both vital and appreciated ...

 Clicker and Ryewolf ...

https://www.tipf.co.uk/forums/topic/57184-202223-forum-finances-update-4th-july-2023/

 

Gateshead Reflections


kev7d

Recommended Posts

The only way to do it - as far as I can see - would be a fiddly selection of the buildings only (above ground) and the buildings + roadway (reflection), then correct the verticals independently. Of course then you run into the problems of the bridge cables...

 

I started to try it another way, by dividing the picture into two along the shoreline, and correcting each half. The problem there is, you lose too much of the picture in cropping rectangular when you've finished.

 

I think it's fine as it is, wonky vertical and all. :) 

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...